Using high current shielding inductance, ultra-low resistance, maximize the conversion efficiency, reduce heat.
Ultra-compact size perfect for the device where needs smaller space module such as RC aircraft, power bank, vehicle power.
High circuit conversion efficiency, the efficiency is up to 97.5% at 6.5V to 5V 0.7A, it reaches to 94% at 12V to 5V 1A.
Ultra-low quiescent current 0.85mA, no switch needed connected to the car battery, can be connected to the cigarette lighter line, or ACC power line.
Output integrated adjustable and fixed voltage, fixed output directly solder the spot on board, and unusual voltage can be adjusted by potentiometer, very convenient.
Input voltage: 4.5V-24V
Output adjust voltage: 0.8V-17V
Output fixed voltage: 1.8V 2.5V 3.3V 5V 9V 12V (need to solder)
Output current: 3A (Max)
Long time working current: 2A
Conversion efficiency: 97.5% (DC 6.5V to 5V 0.7A)
Switch frequency: 500 KHz
Output ripple: 20mV (12V to 5V 3A)
Output overvoltage protection: no
Static current: 0.85ma
Load adjust rate: +/-1%
Voltage adjust rate: +/-0.5%
Dynamic response speed: 5% 200us
Output short circuit protection: yes (don’t for long time short circuit)
Input reverse protection: no
Enable control: high level work, the low level not work, the high level of 2-5V, the low level of about 0V.
Default internal pull up to the input positive
Welding hole spacing: 2.54mm
Size: 20mm x 11mm x 5mm (L x W x H)
1 x Mini DC-DC Step Down Power Module