Tesla Coil is a transformer (resonant transformer) that operates on the principle of resonance. It was invented in 1891 by the American-born Serbian scientist Nikola Tesla. It is mainly used to produce ultra-high voltage but low current. High frequency AC power. A Tesla coil consists of two (sometimes three sets) coupled resonant circuits. Tesla coils are difficult to define, and Nikola Tesla has tried a large number of coil configurations. Tesla uses these coils for innovative experiments such as electrical lighting, fluorescence spectroscopy, X-rays, high-frequency AC current phenomena, electrotherapy and radio energy transmission, and transmission and reception of radio signals.
This Tesla adds a music player function to the ordinary Tesla: a new concept speaker that the arc excites the air to become the air vibration generated by the plasma! You can play mobile/computer music with clear sound. The voltage input is 15-24V DC, the arc length is 24V, the optimum is 5-10mm meters, the volume is small, the work and energy are complete, the machine can work continuously for a long time, and the LED can be lit up by the air, the foam energy-saving lamp, the flash frequency Tube, you can play radio transmission, rotating arc, etc.
Pre / Mass Order Please Contact: Garrick – 01156884603 (WhatsApp)
1, this product is safe, power is not high, will not be injured by electric shock, but it is not recommended to touch the arc at the top of the coil, there will be a burning sensation.
2, do not touch the heat sink after powering for a long time, the temperature is very high, especially when using 24v high voltage, the heat is huge, the fan interface is reserved, if necessary, please add cooling fan to dissipate heat.
3. It is recommended that when the Tesla coil is working, do not put the body or other objects close to the coil, that is, leave the space within half a meter of the coil and leave no other objects, because other objects as good conductors will make the coil form a good loop, absorbing the coil energy, making Tees Pulling the coil at this time shows that the effect is worse or cannot be demonstrated! Please note;
4, do not put mobile phones, mp3 and other electronic equipment close to the coil, otherwise the coil will generate high-frequency magnetic field interference, making mobile phones, mp3 and other equipment malfunction or even damage!
Complete set of parts:
Note that the blue monolithic capacitor in the figure is replaced by a yellow monolithic capacitor. It is the same function and effect, thank you.
Xenon lamp or fluorescent lamp illumination principle: The Tesla coil secondary emits high-intensity electromagnetic waves. When the inert gas in the lamp tube is ionized under high voltage, a gas conduction current is formed, and the moving gas ions continuously collide with the mercury atoms. The energy of mercury atoms is given, so that the extranuclear electrons of mercury atoms can always transition from low orbit to high orbit. After that, the extranuclear electrons of mercury atoms spontaneously re-start from high orbit to low orbit due to higher energy. The form of photons releases energy outwards, and since the atomic characteristics of mercury atoms are mostly concentrated in the ultraviolet region, it is known that most of the photons emitted by mercury atoms are in the ultraviolet region, and these high-energy ultraviolet rays collide with the phosphor. White light (or other color light, depending on the color of the phosphor) is produced.
Plasma horn speaker sound: The principle is that the arc stimulates the air to become a new concept speaker for the air vibration generated by the plasma. It can be connected to the mobile phone, mp3, computer audio input. The actual experience of this mini Tesla arc plasma speaker is compared with The high-frequency frequency response of the traditional speaker sound is better, and the plasma speaker has better sound quality, stable and safe, can play any music without grounding, and is convenient to use. It can be used as a home audio player. new member!
Principle of wireless transmission: use one end of the coil to connect the LEDs at both ends, close to the transmitting device, the LED will be illuminated, the principle is resonant wireless transmission.
1. Resistance welding error, there are two resistance values of 10K and 2K, corresponding to the identification on the board.
2. The electrolytic capacitor and the positive and negative LEDs are wrong, and the long legs are positive.
3. The 80NF70 and BD243 models should correspond to the board.
4. The wire ends at the bottom of Tesla burn off the outer paint with a fire or scrape off the paint and weld.
5. The intersection of the black lines must be on the outside, and do not touch the Tesla coil, preferably about 1 mm.
6. When the black line is long, cut it short and put it around 1 turn to the height of the middle of the coil. Refer to our physical map.
7. Check for solder shorts and solder joints.
8. The power supply voltage is 15-24V, and the current is above 2A. It can be connected to the DC seat or from the fan interface.
9. The blue light is the power light. If it is not on, check the resistance welding and the welding of the lamp. The red light is on and off, and there is no arc.
10. Please watch the security issues that need to be noted in the video and webpage and then use it again.