Suitable for corridor, toilet, garage, staircase, store room and more, also can be security purpose.
When people get in the sensing area, the switch will connect with the load. The switch will stay connect until the sensing area no people. Light up in dark condition(default).
Easy installation with 2 wires connection, live wire input and live wire output same as the usual wall switch. Compatible to energy-saving light, incandescent light, fluorescent lamp, LED light, and others.
Auto PIR light can save energy and solved the problems of sound switches which will affect by the sound of bark, horn and more. PIR switch can reduce the probability of spreading bacteria.
TAD-T28AR (2 wires)
86mm x 86mm
On ceiling: 360°
On wall : ≤ 120°
On 3m ceiling: diameter of ≤ 6meter
On 1.5m wall: front sensing of ≤ 8 meter
-20℃ - 35℃
16 - 350 seconds (adjustable)
To increase delay time, turn the 204 potentiometer anti clockwise for 180° for 360 sec.
5LUX - 500LUX (adjustable night / all day operate)
default: light up in dark condition
daytime: slowly turn the 105 potentiometer anti clockwise
Incandescent light ≤ 1000W ; energy saving light≤400W ; LED light≤200W
*not suitable for ≤ 5W lamps
Energy-saving light, incandescent light, fluorescent lamp, LED light, and others
Keep a distance of at least 50cm from the heat source and dont point the strong light to the sensor.
Make sure no electricity connection when adjust the potentiometer
Put on the outer casing before connect to electricity after adjust the potentiometer.